was successfully added to your cart.

Daily Archives

May 25, 2017

Site Safety – Power Saws

By | Uncategorized | No Comments

Careless or improper use of any power saw may cause a serious or fatal injury.  Keep in mind the following precautions to help reduce the risk of injury when working with a power saw:

  • Always wear the appropriate personal protective equipment (PPE). Eye protection, gloves, sturdy boots and protective clothing should be worn. You must wear goggles or properly fitted safety glasses with adequate top and side protection. Always wear heavy duty work gloves (e.g., made of leather or other wear resistant material) when handling the saw. Heavy-duty, nonslip gloves improve your grip and help to protect your hands. Wear sturdy boots with nonslip soles. Steel-toed safety boots are recommended. Clothing must be sturdy and snug- fitting, but allow complete freedom of movement. Avoid |oose—fitting jackets, scarf’s, neckties, jewelry, flared or cuffed pants, unconfined long hair or anything i ‘ that could become caught on any obstacles or moving parts of the unit or the material you are cutting.
  • Power table saws must have an upper guard that covers the entire blade of the saw; don’t remove the manufacturer’s installed guard and get them fixed if they do not work properly.
  • When using chain, brush, cut-off or any hand held saws, keep both hands on the saw to help prevent from being cut and have more control place your second hand on the auxiliary handle or motor housing. Keep your body positioned either side of the saw blade. Secure what you are cutting and never hold the material that you’re cutting.
  • After a cut, be aware of the necessary time it takes for the blade to come to a complete stop; be aware of the moving blade until it stops moving. Don’t run the saw while carrying it at your side.
  • Use your power saw within its limits. Know the type of blade and its uses; only use a blade that’s approved for the saw and material to be cut. Using an improper blade may cause it to shatter or crack in use causing it to be shot out at you or anyone in the area. Don’t use dull or damaged blades which can cause excessive friction, blade binding and kickback.

BE SAFE – Before you use any power saw be sure that you have the proper protective gear and are trained to operate the saw!